Slot Width Measurement

4/7/2022 admin

Bag Limits (per person) BLUE CRAB (F) Recreational crabbing Blue crab info. 5” Carapace Width. 50 Crabs/Day not to exceed 100 Crabs/Vessel/Day. STONE CRAB CLAWS (J) 2 ¾' Propodus Length. UNLAWFUL TO POSSESS from June 15 – August 15 (no possession limit during open season) SPINY LOBSTER (K) 3” Carapace Length (L) 2/Day: HARD. Ex: small radius nominal on the slot is.780' and large radius nominal is.995' making the nominal slot width.215'. I can easily measure cylinders on the small and large radii of the slot. I just measured a random sample of about 10 tee nuts that are for a 5/8' slot and they measured between 0.590 and 0.610, so it seems likely that the slot width could and probably should be pretty close to its nominal size and the clearance is designed into the nut.

You’re welcome to change the size of your bet while playing slots any time you like. It doesn’t matter if you’re winning or losing, changing the size of your bet isn’t going to alter your chances to win. The only thing that matters is the house edge you’re working against and the average bet size of your wagers. Use a large slot size! I'd use a large slot size (not more than.020' slot) and not over a 3' point. This will be plenty for a pitcher pump and maybe even a 1/2 hp jet pump. Before using a 2' PVC for an outer casing check to see that the 1-1/4' drive point and couplings will fit through the 2' PVC.

Our pins are made in our shop in Leitchfield, Ky. The size information listed below on our size chart is what we have seen fit these guitars in years past. Contact us for custom sizes and unslotted pins. The unslotted pin is a big thing now and we have alot of people asking if we have them. Thanks Bryan England

Never modify your guitar to make bridge pins fit !

Always get pins that fit your guitar !

Bridge pins are certainly not ' one size fits all '. With this size chart, our aim is to help you get the correct size pins the first time. These pin sizes cover most guitars out there. Of course, there are custom pins, old pins that are no longer made and pins sizes that were used for brief periods. Please contact us with any questions. As always, if you order a set of pins and they do not fit your guitar, we will replace them with the proper size pins. For more discussion, we break the pins down to three parts: the head, the skirt (flared below the head) and the shaft.

Size 1

3 º tapered shaft with the diameter at the top of the shift (just below the skirt) of 0.210' and a string slot running the full length of the shaft, stopping below the skirt.This size pin will fit Martin guitars prior to 1994 (except HD-28), Collings guitars prior to 2002, as well as Blanchard, Garrison, Goodall, Ryan, Santa Cruz and Taylor guitars.
Fits Larrive D-03R

------------------------------------------------------------------------------------------------------------------------

3 º tapered shaft with the diameter at the top of the shift (just below the skirt) of 0.210' and a string slot running the full length of the shaft through the skirt.
Fits Gibson after November 2009

------------------------------------------------------------------------------------------------------------------------

Size 1.3

3 º tapered shaft with the diameter at the top of the shift (just below the skirt) of 0.205' and a string slot running the full length of the shaft through the skirt.
Fits Gibson Guitars from later years to 2009, Weissenborn, Huss & Dalton, McPherson,
Washburn, Froggy Bottom, Takamine, Taylor,
Taylor 6C8 2007, Alyare-YARI, Martin D-166T, Guild D-412
NOTE: We have found the size 1.3 fits the newer model Guild guitars.

------------------------------------------------------------------------------------------------------------------------

5 º tapered shaft with the diameter at the top of the shaft (just below the skirt) of 0.220' and a string slot running the full length of the shaft and cutting through the shirt. This size will fit Martin guitars since 1994 and some Old Gibson guitars.
Also, Fits 2007 Martin D-28

------------------------------------------------------------------------------------------------------------------------

Size 2B

The same as size 2A except the string slot actually stops 1/16' below the bottom of the skirt. This size will fit Martin HD-28 guitars prior to 1994 and
Alyare-5236

------------------------------------------------------------------------------------------------------------------------

If you own a new Martin guitar, chances are the bridge pins are installed so that the head of the pin sticks up about 1/4' above the bridge. Our Size 2A pins will fit the same way. Size 2C is the same degree of taper but with a reduced shift diameter (0.215' at the top of the shaft) so that they will sit farther down in the bridge.
This size will fit 2010 Martin HD28V.

------------------------------------------------------------------------------------------------------------------------

Size 4.1 and 4.2

A larger head profile with no skirt make these pins stand out on Dreadnought and Jumbo guitars. Available in Size 4.1 (3 º tapered shaft) and Size 4.2 (5 º tapered shaft). Larrivee guitars use a Size 4.1 slotted pin.

------------------------------------------------------------------------------------------------------------------------

This size will fit Maton EB6808TE, IBANEZ

------------------------------------------------------------------------------------------------------------------------

Size 4.2C

Beginning in 2002, Collings switched to an unslotted pin with a 5 º taper and a longer shaft length. The shaft diameter is 0.223' (just below the head). Also used on Bourgeois guitars.

------------------------------------------------------------------------------------------------------------------------

The diameter at the top of the shaft is 0.207' and tapers down to 0.144' with a long (0.945') shaft. The slot runs the full length of the shaft, stopping below the ball. These pins do not have a skirt - just a slight ridge beneath the ball. The slot does penetrate this ridge. This pin size will fit Guild, Yamaha LS400 & Takamine (12 String).

------------------------------------------------------------------------------------------------------------------------

Size 5.1 and 5.2

These pins re-create the simple, classic look of the original ivory pins used by Martin in the 20's and 30's. Vintage guitars will use a Size 5.1 with no string slot. Modern guitars, including Vintage Reissues, will use either a slotted (5.1) (3 degree taper, 0.210 below skirt) or slotted (5.2) (5 degree taper, 0.220 below skirt).

If you are unsure of your pin size, you can send us one of your original pins to be matched. We normally send the new set out the same day as we receive your original.

Released 2019, April 25
159g, 7.4mm thickness
Android 9.0, up to Android 10, EMUI 10.0
64GB/128GB/256GB storage, microSDXC
12%6,886,513 hits
6.15'
1080x2312 pixels
48MP
4-8GB RAM
Kirin 710
3340mAh

ALL VERSIONS

MAR-L01A

MAR-L21A/MAR-LX1A

MAR-LX1M

MAR-LX2

MAR-L21MEA/L22A/L22B

Versions: MAR-L01A, MAR-L21A, MAR-LX1A (Europe); MAR-LX1M (Russia, South Africa); MAR-LX2 (Singapore, Hong Kong); MAR-L21MEA, MAR-L22A, MAR-L22B (Middle East); MAR-LX3A (LATAM)

Network	Technology	GSM / HSPA / LTE
	2G bands	GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 (dual-SIM model only)
	3G bands	HSDPA 850 / 900 / 1700(AWS) / 1900 / 2100 - Europe, Canada
	HSDPA 850 / 900 / 1900 / 2100 - Asia
	4G bands	1, 3, 4, 7, 8, 20, 38 - Europe
	1, 3, 5, 7, 8, 28, 34, 38, 39, 40, 41 - Asia
	1, 2, 3, 4, 5, 7, 8, 12, 17, 28, 66 - Canada
	Speed	HSPA 42.2/5.76 Mbps, LTE-A (2CA) Cat6 400/50 Mbps

Launch	Announced	2019, March 27
Launch	Status	Available. Released 2019, April 25